Bauklimatik Dresden Software

This sounds like a own boundary condition for the inner side.
You can switch the type of the interface for inside to the detailed model. Here you can set your own climate data for temperature and relative humidity. See also the climate data tutorial for data formats.

This sounds like a own boundary condition for the inner side.
You can switch the type of the interface for inside to the detailed model. Here you can set your own climate data for temperature and relative humidity.

Hello,

You can have a look into the lightweight wall tutorial.
https://bauklimatik-dresden.de/delphin/ ... _air_space

Hello, It is a possible approach. You don't need do modify more things. You need a mean value of the heat flux over a certain time. In this time you need a high mean temperature difference between inside and outside. You can use the hourly values and calculate the mean values later for example with ...

Hello,

May you can send me your file (tsv and epw). I would like to repeat the process.

Hello, The WTA indoor climate model doesn't simulate a real indoor climate. It only calculates indoor temperature and relative humidity based on the daily average of the outdoor temperature. Therfore no ventilation is set or needed. If youz like you can precalulate the indoor climate with a room or ...

Hello,

We have a tutorial which describes the moisture assessment on our homepage. You can find it here:
https://www.bauklimatik-dresden.de/delp ... .6_en.html

Hello,

Using the longwave radiation source model is the correct way. This source model can only be assigned to a air space. That means you need to assige air as material to your crawl space.

Hallo,

Das ist leider nicht so einfach. Es gibt Modelle zur Aufteilung in Direkt- und Diffusstrahlung. Diese funktionieren aber nur vernünftig wenn man etwas über die Bedeckung weiß. Ich schau mal nach und melde mich nochmal.

Hello, In your case I need the project file in order to find out anything. What do you applied between the two layers, the contact condition or a material layer? Do you read the tutorial regarding contact conditions? https://www.bauklimatik-dresden.de/delphin/2nd/doc/D6.1.6_ContactConditions/Contact...